Sapphire Ingots
Product Highlights
Our Ingots are cored from our HEM grown boules after the boules have been sliced and
graded by our technicians. The ingots are cored on A-axis using precision CNC coring machines.
The ingots are then inspected for any defects and trimmed to length. The crystal axis is measured and the ingots are precision ground to final diameter.
Final quality inspections are performed before packing and shipping.
Technical Specifications
2” Ingot | 4” Ingot | 6” Ingot | |
A Plane | ±0.2° | ±0.2° | ±0.2° |
Orientation | (C-A) ±0.1° / (C-M) ±0.1° | (C-A) ±0.1° / (C-M) ±0.1° | (C-A) ±0.1° / (C-M) ±0.1° |
Primary Flat Length | 16.0 ±0.5mm | 30.0 ±0.5mm | 47.5 ±1.0mm |
Diameter | 50.9 ± 0.05mm | 100.1 ± 0.1mm | 150.0 ± 0.2mm |
Length | 40 to 180mm | 40 to 180mm | 40 to 180mm |
Exclusion Area | <10% | <10% | <10% |
Circularity | < 0.02mm | < 0.02mm | < 0.02mm |
Surface Roughness | FG | FG | FG |
Purity | >99.999% | >99.999% | >99.999% |
Edge Chips | Edge chips are not in the effective length | Edge chips are not in the effective length | Edge chips are not in the effective length |
Visual Inspection Quality | No inclusions, polycrystalline areas, block, twins, bubbles, cracks, pits as seen under high intensity light and diffuse illumination | No inclusions, polycrystalline areas, block, twins, bubbles, cracks, pits as seen under high intensity light and diffuse illumination | No inclusions, polycrystalline areas, block, twins, bubbles, cracks, pits as seen under high intensity light and diffuse illumination |
This document is copyright © September 1, 2015 GHTOT. All rights reserved. This document is provided for information purposes only; contents are subject to change without notice. It is not warranted to be error-free, nor subject to any other warranties or conditions including implied warranties and conditions of merchantability or fitness for a particular purpose.